TS 700 STIHL Cutquik®

Distributor Suggested Retail Price DSRP:   $1,379.95


Reserve Now for In-store Pick Up

This cut-off machine is designed from top to bottom for extended service cutting.

With a powerful, high-speed engine it's easy to see why the TS 700 STIHL Cutquik® cut-off machine is one of the most advanced STIHL Cutquik® ever produced. Featuring the X2 low maintenance filtration system, you get extended service cutting and airflow with almost 100 percent cleaning efficiency. Not only is this cut-off machine lightweight and well balanced, it also features a five-point dual ele...Read More
Print Spec Sheets
TS 700 STIHL Cutquik® Specifications
DISPLACEMENT 98.5 cc (6.0 cu. in.)
ENGINE POWER 5.0 kW (6.7 bhp)
WEIGHT* 11.6 kg (25.6 lbs.)
FUEL TANK CAPACITY 1200 cc (40.6 oz.)
ENGINE SPEED 9,300 rpm (Elec. Gov.)
*Weight includes water attachment and guard. Shown with optional STIHL diamond wheel.
Model Features
  • Zoom
    Reduced-Emission Engine Technology - Caring for Nature
    The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

    More Information

  • Zoom
    Decompression Valve
    The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
  • Zoom
    IntelliCarb™ Compensating Carburetor
    The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
  • Zoom
    X2 Air Filtration System
    The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
  • Zoom
    Semi-Automatic Belt Tensioning
    With consistent, semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
  • Zoom
    Anti-Vibration System
    STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
  • Zoom
    STIHL ElastoStart™
    The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
  • Zoom
    Ergonomic Grip
    The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
Standard Features
  • Zoom
    Common Features for Gasoline-Powered STIHL Cutquik® Cut-off Machines
    View the features common to many gasoline-powered STIHL Cutquik® Cut-off Machines.

Important Information
WARNING! Never use carbide-tipped, wood cutting or circular saw blades on cut-off machines. They can cause severe personal injury or death from reactive forces, blade contact or thrown tips. Never cut wood of any type.
Note: STIHL engine products with the Caring for Nature logo are cleaner than EPA Standards for exhaust emissions.
Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty. Learn More…
WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand and follow carefully the operating and safety instructions in your instruction manual before using such products.

STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.
Click to view the STIHL Limited Warranty Time Periods
Optional Accessories
  • Zoom
    STIHL Cutquik® Cart
    Ideal for long, precise cuts, this cart offers improved handling and cutting performance with a forward weight orientation and a toolless quick connect system.
We Also Suggest
  • HP Ultra 2-Cycle Engine Oil Zoom
    HP Ultra 2-Cycle Engine Oil
    HP Ultra is a fully synthetic 2-cycle engine oil specially suited for high performance chainsaws and power tools. This oil has outstanding engine cleaning characteristics, plus “ultra” superior lubricating qualities in comparison to other 2-cycle engine oils. It is ideal for use in STIHL 4-MIX® engines. This oil is biodegradable, degrading by 80% in 21 days.

    •2.6 oz. bottle makes 1 gallon mix

    •5.2 oz. bottle makes 2 gallon mix

    •6.4 oz. bottle makes 2 1/2 gallon mix

    •12.8 oz. bottle makes 5 gallon mix

    STIHL recommends a mix of 50:1 high-quality 89 octane or higher unleaded gasoline to STIHL engine oil. This same mix ratio should be used during break-in.

  • No-Spill® Fuel Containers Zoom
    No-Spill® Fuel Containers
    The latest advance in gasoline can technology is here with No-Spill® fuel containers. Featuring a special treated body for low permeation, thumb-button flow controls for easier pouring, and a wide and stable base design to reduce upsets, No-Spill® fuel containers help ensure that the gasoline goes into your tank, not on the ground or into the air. Fill even smaller-sized tanks without spilling – flow stops automatically when the tank becomes full. With 1¼-gallon, 2 ½-gallon and 5-gallon sizes available, you’re sure to find one that fits your needs. Ask your local STIHL Dealer about No-Spill® fuel containers. Don’t settle for anything less.

    Meets California Air Resources Board Phase II requirements for sale or use in California. No-Spill® gasoline cans are tested and certified to ASTM F-852-99 standard specification for portable gasoline containers for consumer use and our diesel and kerosene cans are tested and certified to ASTM F-976-02 standard specification for portable kerosene and diesel containers for consumer use.

For Your Safety
  • Anti-Vibration Gloves Zoom
    Anti-Vibration Gloves
    Reduced vibration from handheld machines. Meets ISO 10819.1996 and ANSI S2.73 vibration standards TRM 72 and TRN 55.

    Sizes available: L, XL
  • Construction Hard Hat System Zoom
    Construction Hard Hat System
    STIHL® Construction Hard Hat System

    Also available as a hard hat only.

    Note: Goggles or protective glasses meeting ANSI Standard Z87.1 must be worn under face screen and shield for primary eye protection

  • Leather Chaps Zoom
    Leather Chaps
    Apron style chap, designed for use with cut-off machines. These chaps are made of top quality leather that provides maximum protection and is abrasion, spatter and spark resistant. Has quick release plastic buckles and easily adjustable nylon straps.

Are you ready for a STIHL?

Rated 5 out of 5 by 3reviewers.
Rated 5 out of 5 by I do believe the best value out there I have been using stihl products for over 30 + years. We have two ts 700 they are dependable smooth cuting tool.I have personaly went though over 100 + 14 inch concret cutting diamonds blades on one saw. In the past four years we have done general maintenance spark plugs air fliters and a occasional pull rope. ps. The ts 700 is very durable saw. October 7, 2016
Rated 5 out of 5 by The only saw I care to use I have ran all makes and sizes of saws over alot of years and if given a chance to chouse a saw this is the saw I took with me it cuts 50% faster than smaller saws and I like the handalAll the way at the back you can get a lot of leverage with it there it also runs just as good upside down too also the drive belt is the best out there they run a long time with no matiance and never had it slip when using water they start good and idle vary well too if money was not a object this is the only saw I would have on my truck if you are out to make money this saw will save you time and money go and get yourself one and you won't regret it August 25, 2013
Rated 5 out of 5 by The Stihl TS700 is the best choice for all your cut-off saw needs, no matter how demanding. I typically use a cut-off saw to install vehicle loop detectors in asphalt and concrete driveways and roadways. In the past I have rented a Makita saw from a local rental agency. Much to my despair, this saw didn't have enough power to allow me to keep it in the material being cut very long at all. I would have to plunge the saw after holding down the trigger all the way and would only be able to cut a few inches at a time. This was very time consuming and very physically exhausting, especially on my back. A good friend of mine owns an older TS700 with a quick cart, and suggested I borrow his saw to see how I liked it. After completion of a job in literally 25% of the time it took with the rented saw with no pain, I was sold. The TS700 did not bog at all in the hot asphalt. Not only did I purchase a TS700 saw with a quick cart, but I also purchased a BG86 blower to keep the dust down while using the TS700. So now I have a Stihl chainsaw, weed trimmer, cut-off saw, and blower. Stihl products are definitely the way to go for professional grade tools with the the best performance and dependability in the industry. I'm sold! May 13, 2013
1-3 of 3